meraki mx84 and mx64 vlan trunking

SOLVED
kenji
Here to help

meraki mx84 and mx64 vlan trunking

hello  

 we are using mx84 sdwan in our main branch and in our sub offices we use mx64 sdwan 

 

in mx84 we set vlan10 192.168.10.x/24, and vlan20 192.168.20.x./24

 

can i cascade or trunk this in our mx64 , using the sdwan/vpn connection 

 

1 ACCEPTED SOLUTION

thanks , is there any solution that i can use the other vlan in sub offices?  via meraki sdwan?

View solution in original post

8 REPLIES 8
Brash
Kind of a big deal
Kind of a big deal

No, the Meraki SD-WAN is an L3 VPN connection. It doesn't bridge layer 2.

thanks , is there any solution that i can use the other vlan in sub offices?  via meraki sdwan?

Brash
Kind of a big deal
Kind of a big deal

There is not in the Meraki world, but realistically it is a very poor network design to extend layer 2.

It's typically only seen with datacenter interconnects using a technology like OTV or VXLAN.

Is there a specific reason you're looking to extend your layer 2 between sites?

our voip , need to be in the same lan segment , our company uses yeastar pbx , its ipphone doesnt connect to the yeastar server if the ip's is not same with its lan segment , btw thanks for the info 

Hi,

 

maybe you should get some VoIP Service consulting to get a scalable solution instead of doing network experiments. 🙂

thanks , 😅

BALAJIRG
Here to help

thanks

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels