cancel
Showing results for 
Search instead for 
Did you mean: 

group policy per vlan and switch setting

Comes here often

group policy per vlan and switch setting

Hi,

I have 3 vlans, 100,200,300.  i want to apply different group policies on the MX.  For internet routing on the switch, it has a default gw 0/0 pointing to the MX IP on VLAN 100.   

 

How do i route each vlans internet traffic to go through the per VLAN group polices defined on the MX ?

The switch is Cisco 2960 which can do basic routing.

3 REPLIES 3
Kind of a big deal

Re: group policy per vlan and switch setting

You will need to move all three VLANs to the MX (so the 2960 is not doing any routing).

 

Then following this guide:

https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Creating_and_Applying_Group_Poli...

Comes here often

Re: group policy per vlan and switch setting

thanks but what about the ip helper address...its a server on one of these vlans...do i plug this helper address on the switch svi ?

Kind of a big deal

Re: group policy per vlan and switch setting

You can configure this on the MX as well.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.