Wireless Client-to-Client Access on Stand-Alone MX64W

Solved
PaulDavis
Conversationalist

Wireless Client-to-Client Access on Stand-Alone MX64W

Is it possible to prevent client-to-client access on an SSID using only a stand-alone MX64W?

And Is it also possible to allow client-to-client access on a different SSID using only a stand-alone MX64W?

Thanks,

Paul Davis

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

To prevent clients talking to each other you need the client isolation feature - but this is not supported by the built in AP's. You need a standalone MR.

 

Yes you could allow clients on different SSID's to talk to each other.  The easiest way would be to bridge both SSIDs to the same VLAN.

View solution in original post

1 Reply 1
PhilipDAth
Kind of a big deal
Kind of a big deal

To prevent clients talking to each other you need the client isolation feature - but this is not supported by the built in AP's. You need a standalone MR.

 

Yes you could allow clients on different SSID's to talk to each other.  The easiest way would be to bridge both SSIDs to the same VLAN.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels