cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wired splash page bypass ?

Comes here often

Wired splash page bypass ?

Hi,

 

I have a combination of wired and wireless users behind a MX using splash pages. Wired clients comes in to MX on separate VLAN.  We have a GPO called Bypass_Splash attached to a number of wireless clients which works as expected.  The Group policy setting for bypass splash seems only to affect Wireless clients so when we attach the Bypass_Splash GPO to a wired client it does nothing...

 

Is there any way to make specific mac addresses bypass splash for wired clients other than moving these clients to another VLAN ?  

4 REPLIES 4
Kind of a big deal

Re: Wired splash page bypass ?

I believe the wired and wireless splash pages differ on the MR and MX.

Comes here often

Re: Wired splash page bypass ?

Correct, they are different splash pages, but it seems that it is only for the wireless splash page you can do a client splash bypass via a group policy...  

Kind of a big deal

Re: Wired splash page bypass ?

Interesting... I didn't realize that the splash bypass was MR only. But yeh, that's exactly what the docs say. I'm not seeing anything that allows you to allow specific users to bypass the splash on an MX either. You may be out of luck here.

Highlighted
Meraki Employee

Re: Wired splash page bypass ?

Hi @couchbob  The splash bypass is MR only thing and wouldn't apply for the wired clients. unfortunately, you will not be able to leverage that option for wired clients. Whitelisting the clients is one way to make the wired clients bypass the splash page, but that will also bypass security checks like content filtering, layer 7 / Layer 3 firewall rules etc, It would be a trade-off at that point.

 

Although this feature is not available at this point in time, I highly encourage you to use the Meraki dashboard to "make a wish" and submit a feature request. You can submit a feature request at the bottom of any dashboard page.

 

Cheers!

 

Raj
 

 
If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.