Wan port on Z3

SOLVED
Steve-Potter
Here to help

Wan port on Z3

Could I use a Lan address to the Wan port on a Z3. 

Its for a home with detached office, the home has a BT hub, the office is the other end of a 1Gb fibre link (with converters), the Z3 will be connected to the Head Office via VPN, I don't really want to change the house kit if I can help it.

Internet -> BT Hub -> Port 1 -> House Lan

                               -> Port 2 -> 1Gb Fibre Converter -> FO Cable -> Finre Converter -> Z3 -> Office Lan

 

The office lan on a different Nat subnet, the tunnel passes via BT hub to Head office and ignores all the X boxes and iPads etc in the house

I don't think the BT Hub can do transparent mode

 

Regards

Steve

 

1 ACCEPTED SOLUTION
MRCUR
Kind of a big deal

This should work fine. I have my Z3 behind a Ubiquiti USG and previously had it behind an MX64. 

MRCUR | CMNO #12

View solution in original post

1 REPLY 1
MRCUR
Kind of a big deal

This should work fine. I have my Z3 behind a Ubiquiti USG and previously had it behind an MX64. 

MRCUR | CMNO #12

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels