WAN is down, MX is up !!!!!!!!

HaniAbuelkhair
Getting noticed

WAN is down, MX is up !!!!!!!!

HI 

I have wired issue happened 

I have MX67

It was showing up on the Meraki dashboard, and WAN is down

I was able to access the Meraki Dashboard with no issue and i was able to ping the local IP's but not the internet IP's 

How come WAN is down and i can access my Meraki ?

 

5 Replies 5
cmr
Kind of a big deal
Kind of a big deal

Is the MX able to contact the internet from a LAN port?

No from the LAN no internet connection 

But i was able to ping local PC from the Meraki dashboard 

but i could not ping 1.1.1.1 or 8.8.8.8 from the meraki dashboard 

MX was UP, Switches UP, AP's UP 

BUT UPLINK was Red and shows Down 

 

Wired issue 

 

I have site to site VPN with another Maraki but i don't think its relevant at all 

 

 

meraki2.PNG

DarrenOC
Kind of a big deal
Kind of a big deal

If a device unregisters from the dashboard or your WAN fails your internal network will still function.

 

I can’t explain how you were still able to access the dashboard however.  

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @HaniAbuelkhair 

 

This document explains the behaviour in more detail

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Behavior_during_Conne...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels