Hi all,
I'm considering VPN configuration with following topology.
Branch1(spoke/MX)------+ ( )
Branch2(spoke/MX)------+ ( ) + DC1(Hub/ASA)
Branch3(spoke/MX)------+ (Internet)
Branch4(spoke/MX)------+ ( ) + DC2(Hub/ASA)
Branch5(spoke/MX)------+ ( )
.....
MXes on Branches only need to establish S2S VPN connection to DC1 and DC2.
i.e. No VPN connections between branches are required.
Now I've tried to configure non-meraki VPN peers while disabling auto-VPN feature by setting VPN Type to "Off". But non-meraki VPN setting menu appears only when I set the Type to "Hub(mesh)"...
* GUI Example1: When the type is set to "Off"...
![off.png off.png](https://community.meraki.com/t5/image/serverpage/image-id/11074i29B0A323261FA6C9/image-dimensions/552x240?v=v2)
* GUI Example2" When the type is set to "Hub"...
![Hub.png Hub.png](https://community.meraki.com/t5/image/serverpage/image-id/11075i150C4E4919CAB271/image-dimensions/852x161?v=v2)
Is it expected result?
Could anyone tell me how to configure S2S VPN sessions like the topology?