VPN CLIENT Policy

SOLVED
ecejhe
Conversationalist

VPN CLIENT Policy

How we can create a policy for specific vpn user? 

Example:

Client (ip as source) has an access to specific destination inside the network with group policy in place. So only the specific IP that we reserved is allow to access this destination.

With client VPN, how we can set this configuration? We don't want to allow the whole subnet of VPN client on this policy. Only specific IP form VPN pool.



Is there any change to assign specific ip from VPN pool to policy not the whole subnet? or maybe mac address of the client machine?



Thanks in advance

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

There is not a nice way of doing this.  You can't assign a specific IP address from a pool.

 

Once the user has logged in via VPN once you can assign a group policy to that user.

View solution in original post

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

There is not a nice way of doing this.  You can't assign a specific IP address from a pool.

 

Once the user has logged in via VPN once you can assign a group policy to that user.

ecejhe
Conversationalist

How the policy will work? is it based on the IP (public) , or the mac address? 

PhilipDAth
Kind of a big deal
Kind of a big deal

It seems to base it on the MAC address.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels