VLAN Communication for two specific end user devices.

bayleafmedia
Here to help

VLAN Communication for two specific end user devices.

Hi, first post. It's a fuzzy one.

 

We have a few VLANs set up in our MX. We need to get two wireless devices to communicate across from VLAN A to VLAN B to a wired controller for another system. The controller needs to be able to also communicate back through to VLAN A for those specific devices. Is it possible with an Meraki MX80 to configure VLAN communication for these devices?

 

thanks

3 REPLIES 3
PhilipDAth
Kind of a big deal

As long as the wireless systems supports normal unicast routing and there are no firewall rules blocking the traffic it will work.

KB
Here to help

You can use routing capabilities of MX from one vlan to communicate with the other one.

https://documentation.meraki.com/MX-Z/Networks_and_Routing/MX_Routing_Behavior

 

Please let me know if this document answers your question.

MilesMeraki
Head in the Cloud

As per the above articles, if VLANs are configured on the MX and no firewalls are in place, Inter-VLAN communication will be available.

 

All that i can see you requiring would be routes from your controller to the MX and from the MX to the controller.

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels