Using Client VPN or AnyConnect from LAN side for access to local VLANs

SOLVED
MarcelTempelman
Getting noticed

Using Client VPN or AnyConnect from LAN side for access to local VLANs

Hello,

 

we have a few customers who require users to use a VPN client to access to other local VLANs also when they are at the office or workplace (so not at a remote site). Normally these users only have access to a few local resources and the Internet but with an established VPN connection they have access to more resources/VLANs.

 

Question: Does the MX support Client VPN and/or AnyConnections from LAN-clients? 

 

It seems it does not support it with AnyConnect. If so we need to keep the old ASA up and running.

 

With kind regards,

 

Marcel Tempelman.

1 ACCEPTED SOLUTION
alemabrahao
Kind of a big deal
Kind of a big deal

No MX does not support Anyconnect for Lan clients.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

2 REPLIES 2
alemabrahao
Kind of a big deal
Kind of a big deal

No MX does not support Anyconnect for Lan clients.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

Thank you. We've reinstated the ASA for Anyconnect and we're going to look for a suitable solution.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels