Upgrading from an MX-84 to a MX-100

cocacond
Here to help

Upgrading from an MX-84 to a MX-100

Good morning,

I have purchased an MX-100 to replace an MX-84 I currently have in my network.  Is there a way to move the config from the 84 to the 100?  Trying to figure out timelines,

3 REPLIES 3
Nash
Kind of a big deal

Meraki's got an article on exactly this situation. 

 

You've got two options there. If you have other devices in the network with the MX, I wouldn't go using the 'clone network' option. 🙂

Network-dad
A model citizen

The article @Nash referenced lays everything out for you very well... but keep in mind this will be a cold swap... IE there will be some downtime. I think the key thing to do is bring up your MX100 and get it pre-staged and configured... That way you can minimize your downtime.

Good luck and feel free to ask any questions you have.

Dakota Snow | Network-dad Linkdedin
CMNO | A+ | ECMS2
Check out The Bearded I.T. Dad onThe Bearded I.T. DadThe Bearded I.T. Dad

Thanks for the input
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels