Tricky Situation

NolanHerring
Kind of a big deal

Tricky Situation

Normal Spoke site, going to datacenter (HUB).

 

There is a URL that can only be accessed from inside the network, as it is hosted in AWS. However since I am using split-tunnel, it won't load (the IP is a public IP and it is whitelisting the company public IP). 

 

Spoke site uses dynamic public IP so we can't whitelist.

 

Is there a way to send the traffic to this public IP (say 5.5.5.5) over the VPN tunnel, so that it goes through the tunnel and then out? 

 

Full-Tunnel the site loads fine since traffic is going out the HUB.

 

Trying to avoid having to do full-tunnel mode

Nolan Herring | nolanwifi.com
TwitterLinkedIn
1 REPLY 1
NolanHerring
Kind of a big deal

And I'm an idiot. I kept looking at this from the SPOKE side instead of the HUB side.

All I had to do was add that 5.5.5.5/32 as a 'local network' on the data center MX (HUB) and it works now 😃
Nolan Herring | nolanwifi.com
TwitterLinkedIn
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels