cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Translate route in linux to MX64

New here

Translate route in linux to MX64

Hi,

 

I have one server where in the server have route gw, for exemple:

 

route add -net 10.2.0.0/24 gw 192.168.0.1

 

How to get this route and set in the Meraki MX64?

 

Thanks.

3 REPLIES 3
Kind of a big deal ww
Kind of a big deal

Re: Translate route in linux to MX64

 

so you just add the subnet. and the next hop(gw)

New here

Re: Translate route in linux to MX64

Yes i create this, but in the dot where my IP is 10.9.0.0 don't passing internet, I ping from one pc from other, but not ping from internet, and in my server linux where I set this comand I ping for internet.

Head in the Cloud

Re: Translate route in linux to MX64

Hi,

In case you want to Ping / Access a service from internet for a server which is hosted in LAN.

You can do either create a NAT Rule or do a Port Forwarding

Both the options are available in Security Appliance->Firewall.

 

You may read the following documentation for complete information.

https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT

 

https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_M...

 

Regards
Ajit
ajitsnw@gmail.com
https://www.linkedin.com/in/ajitkumarverma/
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.