Hi everyone!
Given that a lot of people are working from home right now we decided to make a quick video showing how you might use a Meraki appliance as a teleworker gateway.
For more details and best practices on Cisco Meraki teleworker solutions see this article: Meraki and Cisco Collaboration Teleworker Solution for Businesses
If there is any other video content you'd like to see, let us know in the comments!
lol "business critical applications"
Nice one adam!
The cutting over was impressive. I was legit thinking "they did think about the fact that the call is going to break right".
The Power of the Telenworker gateway is well about 50 Watts 😄
Funny video guys 🙂 I love it.
Also a good case for using 5 GHz wireless in your client devices, because did you see that airtime utilzation on 2.4.
At ~ $300+ a piece, the Z3 boxes aren't exactly something we would be handing out to all remote users but I could see some critical roles where they would be worth every penny. I especially like the option of being able to plug an IP phone in for use at home.
Super informative and powerful video. Meraki is easy to tech but some really cool and innovative technology. Wish our company would implement more of Meraki gear.
This could have came in handy for some of the users we had to get working from home.
You have the cellular gateway in the video, but if someone happens to get their hands on a Z3C, watch out.
Do not pack it all up, new and unboxed, with a lovely nano sim, and unlimited 4G plan, and drive to a remote site...
The cellular configuration needs to come down from the Dashboard, which means you need an ethernet internet connection first for the Z3C to sync up. Watch out!!
@JimmyPhelan wrote:You have the cellular gateway in the video, but if someone happens to get their hands on a Z3C, watch out.
Do not pack it all up, new and unboxed, with a lovely nano sim, and unlimited 4G plan, and drive to a remote site...
The cellular configuration needs to come down from the Dashboard, which means you need an ethernet internet connection first for the Z3C to sync up. Watch out!!
Yup. Sounds like you found out the hard way? 🙄
I did, and god bless Internet Connection Sharing on an old Windows 7 Laptop
Thank you for that heads up. So far we've only done Z3 models but one or two new customers are considering Z3c's and one of those would be primarily run over cellular.
We usually preload/configure/allow firmware updates before a box goes out but occasionally send out unconfig'd units at customer request (or direct ship because someone is in a hurry) and that would be an unpleasant surprise...
Watch out for Trial Kit on this, as they tend to be direct shipped!
Quick question regarding this. I assume that once the configuration is downloaded over an ethernet internet connection it would then work in the scenario? i.e. it doesn't need to download this configuration on every reboot and would continue to work for a user with failed internet for a few days (even being rebooted) while waiting for the internet connection to be fixed.
Thanks in advance
Yep, once a device has a downloaded configuration it will come up and use the configuration it already has, it doesn’t need to download it again. When it connects to the Dashboard if there have been changes while it was offline then it will download them.
Great Job Adam, had to smile about the TPS reports! 🙂
Is a 2nd physical uplink supported with Z3 via a WAN port? Or for that MX is needed?
The Z3 only has one uplink, if you want two uplinks you need an MX - MX64 is the smallest.
Great video but I must have missed something. My Site-B is configured as 'Spoke' selecting Site-A as hub. Site-A needed to be set to 'Hub'. VPN status is green. Both IP ranges are different, one 10.10.... and the other 192.168.... When I map from computer/Site-B to share on computer/Site-A it will not connect as simply in your video. Using Windows 10. What am I missing?