Hello,
I have an MX84 that I would like to function as an Auto VPN hub and gateway for a segregated wireless network.
I'm looking to enable a default route that forwards all traffic originating from my Auto VPN to a next hop IP on a LAN subnet. This part seems to work fine with a VPN-enabled static route.
However, I would also like my wireless VLAN to ignore this route and use the WAN interface for outbound traffic.
I had initially planned to solve this by adding a source-based default route, but Meraki does not allow me to set the next-hop IP in the WAN subnet for some reason:
![djgrothe_0-1731077684519.png djgrothe_0-1731077684519.png](https://community.meraki.com/t5/image/serverpage/image-id/40400iE2CA9138F89DA7CA/image-dimensions/861x251?v=v2)
![djgrothe_1-1731077758177.png djgrothe_1-1731077758177.png](https://community.meraki.com/t5/image/serverpage/image-id/40401iB35379453F6D3B39/image-dimensions/838x67?v=v2)
The other potential solution I can think of would be to add a source-based default route for just the Auto VPN traffic, but Meraki does not allow me to add IP ranges to the source that is not on a local subnet.
Has anyone else encountered this, or have any insight for another possible solution?
Thank you.