Previously, before I started, and directly after I started was the boom for us using Meraki. When I first got to the company I installed one and it would poll perfectly but since then I started becoming one of our main Meraki guys... Now most recently when I install merakis the polling is failing. I have the same community string and the exact same settings in the dashboard. Any Guides or tips on what may be missing would be useful!
The two places I recently installed that are having issues are different... I forgot to include this information... site 1: Meraki was not setup via DHCP it was setup via PPPoE connection and site 2: the WAN was setup with static information... could this be the issue on why the polling is incorrect?
Remember that you are actually polling the information from the Dashboard and not directly the MX (hence the target being snmp.meraki.com ), although if you have allowed it, you should be able to carry out continuous pings to the MX.
Also, remember to put the IP address you are polling from in the Allowed list.
The Network-wide setting is useful only when you are polling internally from the LAN.
If you are still having trouble, try following the testing steps here and see what you get:
Please keep in mind that what I post here is my personal knowledge and opinion. Don't take anything I say for the Holy Grail, but try and see! Appreciate who helps and be respectful of every opinion and every solution offered. Share the love, especially the Meraki one!