Site-to-site VPN with AWS - Redundent tunnel

SOLVED
Fakrul
Here to help

Site-to-site VPN with AWS - Redundent tunnel

Hi,

 

Trying to figure out how to configure site to site VPN redundency when there one single uplink for MX. By default AWS provision two (2) VPN tunnels. But when I try to configure both tunnels for the same remote subnet it is generating following error:

 

merakivpn.PNG

Thoug the tunnels goes up and working fine; but wondering whether there will be any issue?

 

Thanks

Fakrul

 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't create redundant VPNs using just the Meraki dashboard - and you wont have any issues.

 

A more complex example using a script to do failover can be found here:

https://documentation.meraki.com/MX/Site-to-site_VPN/Tag-Based_IPsec_VPN_Failover

View solution in original post

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't create redundant VPNs using just the Meraki dashboard - and you wont have any issues.

 

A more complex example using a script to do failover can be found here:

https://documentation.meraki.com/MX/Site-to-site_VPN/Tag-Based_IPsec_VPN_Failover

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels