Setup temporary client vpn

[Karlo_nico23]

Hi Guys,

We have limited Public IP in our office and having problematic Client VPN w/ Watchguard FW. 
Im trying to setup a MX64 just for Client VPN setup. Attached on ISP1 Modem. Same Public IP with Watchguard.

Any feedback?

We only have a flat network. Im have a successful connection with client VPN setup but cannot access the servers with 132.147.160.X Servers. From Watchguard, we also have a 132.147.0.0/16 Setup

[ww]

How  is your client vpn config?

Is the mx  gateway  for  all devices  in your network?

[PhilipDAth]

You can not have the same public IP address configured directly on both devices at the same time.

You can replace the watchguard with the MX, or you can put the MX behind the watchguard, run it in VPN concentrator mode, and NAT udp/500 and udp/4500 through to the MX.  This will only work if the watchguard is not using IPSec for anything.

https://documentation.meraki.com/MX/Deployment_Guides/VPN_Concentrator_Deployment_Guide