Secondary WAN IP address at the same interface

James12
Here to help

Secondary WAN IP address at the same interface

To all experts,

 

I checking too see meraki MX is able to support the function of configure a secondary IP on the wan interfaces.
We have 1 static IP and 7 secondary ip address.
Cisco router is able to do so by 
int gi0/1
ip address 1.1.1.1 255.255.255.252 
ip address 3.3.3.1 255.255.255.248 secondary

 

I do see documentation on WAN IP configuration but could not find one documents on the secondary IP address configure.


 

4 REPLIES 4
Greenberet
Head in the Cloud

not as a direct IP as far as I know, but you can do 1:1 or 1:Many NAT with different IP Addresses on the WAN Interface:

 

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Firewall_Settings#Forwarding_rul...

@Greenberet  thanks for the reply.
so on the 1:1 NAT I key my secondary IP address  ?

exactly, and then you specify the internal ip of the destination machine.

@Greenberet how about using secondary ip as public IP for certain traffic?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels