Routin Issue!

khurram
Here to help

Routin Issue!

Hello,

 

I am using Mx65w and Cisco 1841 router in my network which are connected with Cisco 2950 switches. I am facing issue in routing between them. Can't be use routing protocol. Kindly guide me how to accomplish this. Diagram is also attached for understanding.

 

Thank youimage.png

4 Replies 4
CptnCrnch
Kind of a big deal
Kind of a big deal

Simply enough: create another VLAN / Layer 3 transfer network between MX and 1841 and point the routes for each subsets to its counterpart.

you mean to say static entries for every subnet?

CptnCrnch
Kind of a big deal
Kind of a big deal

That‘s one possibility, and completely feasible with the few prefixes you‘re running.

Another one would be using OSPF, but from what I understood you‘re not able to have that in place.

There are a total of 8 subnets in the whole network.  I would definately use static routing.

Get notified when there are additional replies to this discussion.