Route-based tunnel supported?

[JuanjoG]

Hello Experts,

Appreciate if somebody can tell me if Meraki support route-based tunnel.

Best regards

[alemabrahao]

I think that you are talking about PbR: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...)

[alemabrahao]

Take a look on the SD-WAN policies.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...)

[JuanjoG]

[alemabrahao]

Try again. https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...)

[JuanjoG]

Thank you very much for information.

[PhilipDAth]

For an IKEv2 VPN to a non Meraki device - it is not supported.

[JuanjoG]

Fine, that's the reply I was waiting.

[pdeleuw · Accepted solution]

Auto VPN is route-based. The reachable networks are announced to the peers via the registry (no IKE in Auto VPN).

For non-Meraki peers, route-based tunnels are not supported, only policy-based tunnels (crypto map).

[JuanjoG]

Thank you very much to explain it.

You give me the answer key...

YES, it's supported with auto VPN.

but is NOT supported for non-Meraki peers.