Hey guys and gals,
I did some browsing before deciding to post, as I couldn't find an answer that helped me any.
I have a camera security system, running on the network behind my firewall (MX84). I can access the IP addy of the DVR from any PC that is connected to our internal network, without a problem. I was recently tasked with getting the owner of this location remote access to the DVR.
Now, obviously I should be able to go into the MX device and add an inbound layer 3 rule that basically states to allow any external IP access to the IP and port # for the DVR. I have done this, but I still cannot get to the login page for the DVR. My DVR is configured to use port 82, and I believe that I have it configured properly (see attached). I know that the xxxx should be an IP, but I don't wanna post it for security reasons.
Can anyone possibly show me where I have messed up (if I have messed up)?