QoS internal traffic MX64

TechTony
New here

QoS internal traffic MX64

I have a NAS and a TV both on my internal network.  Infrastructure is an MX64 and a MS220-8P.  Network is flat.  I'd like to apply some QoS and/or prioritization rules to the streaming traffic between the NAS and the TV.  I've narrowed down the ports and traffic types but am at a loss about building the rules in the MX UI -- let alone whether or not the MX64 is capable of what I want to accomplish.  Expert recommendations?  Thanks!

4 REPLIES 4
MerakiDave
Meraki Employee
Meraki Employee

If you wanted to keep the network flat and not place the NAS and TV on a different VLAN you can still set QoS rules for your local LAN, all on VLAN 1 but based on TCP/UDP port numbers under Switch > Configure > Switch Settings.  If traffic will be traversing the MX, you can create those QoS rules under Security Appliance > Configure > Traffic Shaping.  A little more info here https://documentation.meraki.com/MS/Other_Topics/QoS_(Quality_of_Service)

 

I get a 'page not found' notification when using that link. Got an article ID?
MRCUR
Kind of a big deal

@TechTony Try this, Dave had the last ) missing - https://documentation.meraki.com/MS/Other_Topics/QoS_(Quality_of_Service)

 

EDIT: Ah ha! The editor is removing the trailing ) for some reason. Add that to the URL and the page will load. 

MRCUR | CMNO #12
Uberseehandel
Kind of a big deal

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels