I am very new to the Meraki Ecosystem so please bear with me if this may look all very basic. I am trying to NAT/ port forward one of the public IPs i was given by my ISP (138.63.178.0/24) to one of the database on the LAN (192.168.1.74) to access Http(s) and SSH ports (22,80,443). This so to have access remotely to the server
I have tried all the permutation the documentation overs I am still not able to get to it.
Thanks Brian
Solved! Go to solution.
Port forwarding uses the WAN ip of the MX itself. If you want to use a different IP given by the provider use 1to1 mapping and close the firewall except for the ports you need.
Port forwarding uses the WAN ip of the MX itself. If you want to use a different IP given by the provider use 1to1 mapping and close the firewall except for the ports you need.
Thanks @BrechtSchamp
I needed to explore the 1:1 Nat but need more clarification on "close the firewall except for the ports "
Check this page. It goes in pretty deep. Let me know if anything is unclear still after checking it.
https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT
@BrechtSchamp ...it is pretty deep for sure and enabled me totally understand what I wanted to know about NAT 1:1
Thanks for sorting me out
You're welcome :).