Policy based routing with different VPN's

wdepauw
Comes here often

Policy based routing with different VPN's

Hi,

 

Our customer would like to have the following hub and spoke setup

 

In the spoke MX there will be 2 VPN tunnels

VPN tunnel 1 : Going to the hub ( autovpn with another MX appliance configured as hub).

 => The hub will announce the default route

 

VPN tunnel 2: Going Zscaler ( non-meraki peer)

 

=> The goal is that the guest traffic ( LAN subnet1) will be routed to the Zscaler for verification

so I would like to implement a policy that says 

=> if coming from LAN subnet1 then push the traffic into VPN tunnel2

 

I have the impression that you can only do policy-routing based using a specific interface and not a VPN tunnel.

 

Is the above scenario possible ?

 

gr

wim

 

 

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

I don't believe that will be possible.

wdepauw
Comes here often

Hi,

 

Tx for the feedback , this confirms my investigation



gr
wim


 

whistleblower
Building a reputation

Hi,

will this (now) be possible with Addressing & VLANs/Source-based default routes?

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels