PXE Boot Meraki

tony6
New here

PXE Boot Meraki

hello we have remote users trying to PXE boot from MX64 at their home location to servers (DHCP and WDS) in HQ  what is best practice should i do DHCP relay and add IP's of servers or should i use boot-next-server option. This request is from our system team related to below commands

 

To support BIOS & UEFI Firmware based hardware, we need to execute following commands on Cisco Switch (Global Configuration Mode):

IP helper-address <IP address of DHCP server>
IP helper-address <IP address of WDS server>
IP forward-protocol UDP 4011

 

2 REPLIES 2
Skatalitico
New here

Hi @Tony

Skatalitico
New here

Hi @Tony did you found slution to this, i have the same problem

 

Skatalitico_0-1634233598967.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels