PBR on Meraki MX

[KyleHB]

Hi,

Im kind of new to this cloud platform of Cisco. Does meraki mx have PBR? I was planning to route 1 host from our network to a specific public IP on my secondary WAN but not using the interface IP.

Thanks in advance!

[BrechtSchamp]

You can do this, sort of...

You can use the flow preferences feature to steer traffic:

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferen...

If the uplink you selected for the preference fails, it'll failover to the other one though.

[jdsilva]

---

@KyleHB wrote:

I was planning to route 1 host from our network to a specific public IP on my secondary WAN but not using the interface IP.

---

You won't be able to NAT to a non-interface IP. Not outbound anyway. You can do this inbound in the 1:1 NAT section on the firewall page, but all traffic will be NAT'd to one of the Interface IP's of the MX (WAN1 or WAN2) for outbound traffic.