New Celito Fibe at work, internet speeds still slow ?

spectrumiv
New here

New Celito Fibe at work, internet speeds still slow ?

Greetings. I am not a IT guru, but the owner of the small business. We just transitioned over

to Celito fiber and internet speeds are still slow: Download=10, Upload=10. Should be 100x20.

Any ideas from the Meraki firewall standpoint that will help this or might be causing this ?

Many thanks !

 

Alan K

5 REPLIES 5
ww
Kind of a big deal
Kind of a big deal

You  have any traffic shaping  configured at 10/10?

What speed do you see if you use  tools 》 dashboard  throughput 

Not sure about traffic shaping, but used Celito speed test website to determine speeds.

Will a chat session with Cisco (might) discover the problem  ?

Thanks!

ww
Kind of a big deal
Kind of a big deal

I dont  know. .. I would verify your mx  configured  traffic shaping  first.  And also check  your  lan and wan  interface  if they did not negotiated  to 10Mb

BlakeRichardson
Kind of a big deal
Kind of a big deal

@spectrumiv  What model of MX are you using?

 

If everything was working fine before you changed ISP and you haven't made any changes to the hardware I would contact your ISP. 

Richard_W
A model citizen

Alan,

 

I like pictures, so lets look at two possibilities:

 

1) Security & SD-WAN > SD-WAN & Traffic shaping. Make sure that the uplink config for your WAN 1 reflects your new capabilities:

Screen Shot 2020-03-11 at 9.09.12 AM.png

 

 

2) On the Local Status page (http://mx.meraki.com/#ethernet) Make sure the Link Negotiation is thusly:

see more about this at: https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...

 

Screen Shot 2020-03-11 at 9.08.10 AM.png

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels