Network wide Clients Page, why not showing MR / MS ?

MarcP
Kind of a big deal

Network wide Clients Page, why not showing MR / MS ?

Hey, 

 

just recognized the Networkwide - Clientspage is not showing any of the Meraki devices... Is there any reason?

 

Why I ask.... Within the org overview a location has been marked as red and showing 1 out of 3 devices is offline.

Opening the site, the Networkwide clientpage appears... If the MX/MS/MR would be shown in there I would not need to click through the Wireless / Switch tabs to see which device has got the Problem...

2 REPLIES 2
BrechtSchamp
Kind of a big deal

Easiest way to troubleshoot that is to go to the topology page. You'll get your whole network and colors will show you which device is causing the problem.

timeshimanshu
Getting noticed

As @BrechtSchamp described. i also agreed this is the best way to find out the offline device also it can tells you the alerting device which have connection problem.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels