Multiple IP Address assigning to single website

Iqbal_S_Malik
New here

Multiple IP Address assigning to single website

Can we assign multple ip addresses to a single website and then can we give add that specific website to a static route. 

 

There is one requirement where we have to provide static route of a website, and that website has almost 16 multiple subnets. So rather than individually adding static route for each subnet, i am searching for an option where we can just a single webstie and to that website multiple ip addresses are assigned.

 

3 REPLIES 3
alemabrahao
Kind of a big deal
Kind of a big deal

When  you are talking about website, are you talking about physical location or website like google.com? Your post is a little confused.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
alemabrahao
Kind of a big deal
Kind of a big deal

If you are talking about configure MX you can read the technical documentation.

 

 

https://documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Applia...

 

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Addressing_and_VLANs

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
PhilipDAth
Kind of a big deal
Kind of a big deal

I think you are asking if it is possible to create a static route where the next hop is a DNS name, rather than an IP address.

 

If this is the case, then the answer is no.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels