Monitor passive MX450 in HA

Magome
New here

Monitor passive MX450 in HA

Hi!

 

Our final cliente has two MX450 in HA in an active-passive architecture. 

 

My NOC team is asking if it is possible to monitor the status (if its up or down) of the passive MX450? 

 

Regards

 

Marco Gomez

 

 

4 Replies 4
Magome
New here

By the way, our NOC team use SolarWinds to monitor this devices.

 

So they want to monitor the MX450 Passive in the SolarWinds

 

Thanks

 

Marco Gomez

jdsilva
Kind of a big deal

A warm spare MX does't have any IP addresses on the LAN side... So about the best you can do it try and poll the WAN side. You can do an ICMP poll of the WAN interface. I'm not sure if SNMP is available on the WAN (i'd hope the answer to that is "No").

PhilipDAth
Kind of a big deal
Kind of a big deal

I'm with @jdsilva - ping the WAN interface of the standby unit.

MRCUR
Kind of a big deal

We monitor the WAN IP's of each MX and the shared virtual IP with simple ICMP ping. 

MRCUR | CMNO #12
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels