Meraki MX ebgp in routed mode

IVYJustin
Just browsing

Meraki MX ebgp in routed mode

Do the current MX appliance support ebgp in NAT/routed mode and not just VPN Concentrator mode?  Looking to see if we can support failover between MPLS and Internet provider via route based VPN.  

5 Replies 5
cmr
Kind of a big deal
Kind of a big deal

Yes they do:

 

Routed Mode

iBGP establishes relationships over AutoVPN and will establish and exchange routes between AutoVPN peers.

eBGP peer relationships are supported on both the WAN and LAN of the MX, peering is bi-directional and routes will be automatically redistributed into AutoVPN.

Alejandro_F
Meraki Employee
Meraki Employee

Hi @IVYJustin,

 

  This new future works on current MXes, there are only two requirements,

 

  • Must be running at least firmware version MX18.205
  • Enable No-NAT mode.

 

 

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.

Is NO NAT mode required? What if I want to allow internet traffic?  

Like this example? https://documentation.meraki.com/MX/Networks_and_Routing/NAT_Exceptions-No_NAT_on_MX_Security_Applia...

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
IVYJustin
Just browsing

Will ebgp now be supported as a route based VPN now?  

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels