MX95 initial setup issues.

Solved
Vinichavez16
Comes here often

MX95 initial setup issues.

I'm using the same internet connection I always use to configure our MX67's and I haven't had any issues with those before but now that I'm trying to configure an MX95 I keep getting this same error. There is no firewall blocking or filtering anything here, like I said the mx67's work just fine with this connection.
 
I read in the community that this is a know issue ad  it can be solved only by meraki Support. Has someone had this same issue?
 
Vinichavez16_0-1635797356608.png

 

 
This security appliance is not connected to the Cisco Meraki cloud.
Make sure you can send outgoing traffic to TCP port 7734 through your firewall.
1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

DHCP or static IP? Have you tried a factory reset?

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

5 Replies 5
Ryan_Miles
Meraki Employee
Meraki Employee

DHCP or static IP? Have you tried a factory reset?

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

I have tried both and none of them worked. I have not tried the factory reset. I'll try it and will update the post.
 
Thanks!
 

also which wan port are you using? a copper port of SFP?

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

looks like it's online now 👍

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

The factory reset made it work!!!

 

Thanks!!!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels