cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX64 and 802.1x

Highlighted
Here to help

MX64 and 802.1x

Hi,

 

I am currently setting up 802.1x authentication with ISE using radius  for wired network.  I have the ISE on a vlan that is connected to the Meraki firewall.  My query is on how the MX64 would route to the ISE server and which IP address it would use as source.  If I have a vlan interface on the Meraki with 10.10.10.10 and the ISE is 10.10.10.11 would it route direct via this interface and use 10.10.10.10 as the source interface?  Or would it use the Internet interface as source IP address?  

2 REPLIES 2
Highlighted
Kind of a big deal

Re: MX64 and 802.1x

@dhutton Where are the clients coming from? If youre trying to add it as a radius client it should see the NPS client connection.

Highlighted
Kind of a big deal

Re: MX64 and 802.1x

It should come from the interface that is in the same VLAN as the ISE server.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.