MX450 - Cooper SFP module on WAN port

Luki
New here

MX450 - Cooper SFP module on WAN port

Hi,

 

If any one of you know if this cooper module EX-SFP-1GE-T should work on the WAN interface on MX450? I'm trying to connect the WAN port on MX450 using MA-SFP-10GB-SR module with MS410 with MA-SFP-10GB-SR connected to the one of the two 10Gbit ports on a switch and I even don't  have link - "lights" - between the devices. I took cooper module to try other option but I'm not sure if this one will work on the MX. What do you think?

 

Luke

2 REPLIES 2
jdsilva
Kind of a big deal

Yes, a (supported) 1G copper SFP will work on the WAN ports. 

 

I've had issues with 10G SFP's not working until the MX receives a firmware upgrade. But that's usually related to third party SFP+ modules.

PhilipDAth
Kind of a big deal
Kind of a big deal

Not getting a link light is your first big indicator.

 

Have you tried crossing over the send and receive fibres in the patch lead you are using?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels