MX cellular with IPv6?

ksumann
Getting noticed

MX cellular with IPv6?

Hello,

 

is it possible to run the inbuilt cellular with IPv6 only?

 

The device is used to create a site-to-site VPN. CGNAT will break the connection so we got a SIM with a fixed IPv6 prefix (only IPv6) but the MX is not connecting, it gets no IPv6.

 

Using another APN, we got an IPv4 and an IPv6 but with CGNAT which isn't working.

 

Any ideas?

3 REPLIES 3
alemabrahao
Kind of a big deal
Kind of a big deal

https://documentation.meraki.com/?title=MX/Other_Topics/IPv6_Support_on_MX_Security_%26_SD-WAN_Platf...

 

Have you checked the documentation?

 

alemabrahao_0-1682710251882.png

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
PhilipDAth
Kind of a big deal
Kind of a big deal

I don't know the answer.

 

I don't think so "right now", but I think a lot of work is going into this area.  You'll have to run a bleeding edge firmware on the spoke and the hub to stand any chance.

PhilipDAth
Kind of a big deal
Kind of a big deal

Try asking support if there is any early access beta for AutoVPN over IPv6 you might be able to go on.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels