MX & Draytek - Internet Dropping out

AnthonyMaddick
Here to help

MX & Draytek - Internet Dropping out

Hi All, 

I am having an internet connection issue between an MX68 and Draytek Vigor 2762n. 

I have set the connection to always on and entered the Draytek into Full "Bridge" mode.

The Cisco connection is set to "No VLAN tag" Direct and I have entered the static IP. 

Every two hours the connection is dropping out and about half an hour later it comes back. 

What should I do to start diagnosing the drop? 

In the past, I have used the Draytek Vigor 130 and not had issues but the customer already had the Draytek 2762. 

Thanks for any input.

Regards

Anthony

5 REPLIES 5
AnthonyMaddick
Here to help

i should mention that it is FTTN NBN delivered by Telstra. 

A bit of a longshot, but did you check for link negotiation issues?

PhilipDAth
Kind of a big deal
Kind of a big deal

Have you checked for firmware updates on the Draytek?

Any logs on the Draytek?

So i removed the Vigor 2762 and installed a Vigor 130 and it connected much faster and now the connection is not dropping. 

 

hi @AnthonyMaddick , wondering if you ever encountered this issue again? I have been facing similar problems - internet WAN link flapping on an FTTN connection when I use the Vigor 130. Is there any other information you can share if you managed to solve it with the V130?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels