MX Templates

[PavanP]

Hello Meraki Community,

Do we have an option to customize network address space after binding with template. We are not using vlans and using single vlan.

[Ryan_Miles]

With VLANs disabled it assumes the same LAN subnet for all MXs. You can only change it at the template level in that case.

If you need unique subnets per site then in the template enable VLANs and choose Subnetting : Unique. If you only need one VLAN that is fine.

[PhilipDAth]

If I understand what you are asking - yes, you can go into the network bound to the template and change the auto-assigned subnet to something else unique in the same supernet allocated to the template.