MX SD-WAN POV

Enrico_Romero
Here to help

MX SD-WAN POV

Hi Team,

 

 

One of our client is requesting for a POV of Meraki MX's SD-WAN.

What are the requirements?

They are going to borrow one MX100 from us and I'm not familiar with SD-WAN.

 

The Meraki SD-WAN Deployment guide is not that clear to me.

Will the SD-WAN work if they only have one Meraki MX?

 

 

How can I showcase the SD-WAN on Meraki MX?

Is there a Step-by-Step SD-WAN POV guide?

Any information will also help.

 

Cheers

2 Replies 2
PhilipDAth
Kind of a big deal
Kind of a big deal

First, your customer can get kit by using the "Try and Buy" program.

https://meraki.cisco.com/form/trial

 

The hint really is in the term "WAN" - which implies at least two sites - which means you would need two MX's.  And to really show it off, at least one of those MX's should have two circuits attached.

 

Here is a CVD (Cisco Validated Design):

https://documentation.meraki.com/MX-Z/Deployment_Guides/SD-WAN_Deployment_Guide_(CVD)

This section in particular shows how to configure the magic:

https://documentation.meraki.com/MX-Z/Deployment_Guides/SD-WAN_Deployment_Guide_(CVD)#Adding_perform...

DavidH
Meraki Alumni (Retired)
Meraki Alumni (Retired)

Hi @Enrico_Romero,

 

It sounds like you'd be selling the Meraki gear to the customer? If so and if you are a registered Meraki partner, I'd suggest talking to your Sales rep, they will be able to help!

 

Thanks,

David

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels