Hi,
I have the following requirement an MX-450 on internal network will be used to setup VPN tunnels over MPLS.
There will also be traffic that is going to be routed into the MX-450 interface wihout VPN.
Can i disable hide NAT and create inbound - outbound rules on the MX?
I already searched forum and read it should be possible to disable hide-nat or setup no-nat mode but i can't find where to do this. (running code MX 15.38)
![TOPO.JPG TOPO.JPG](https://community.meraki.com/t5/image/serverpage/image-id/15449i3C771E599414A19D/image-size/large?v=v2&px=999)