cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX NO-NAT and inbound outbound security rules.

Comes here often

MX NO-NAT and inbound outbound security rules.

Hi,

 

I have the following requirement an MX-450 on internal network will be used to setup VPN tunnels over MPLS.

There will also be traffic that is going to be routed into the MX-450 interface wihout VPN.

Can i disable hide NAT and create inbound - outbound rules on the MX?

 

 

I already searched forum and read it should be possible to disable hide-nat or setup no-nat mode but i can't find where to do this. (running code MX 15.38)

 

TOPO.JPG

2 REPLIES 2
Kind of a big deal

Re: MX NO-NAT and inbound outbound security rules.

Hi @FDM , you’ll need to raise a ticket with Meraki support to request they disable NAT on your MX.  You’ll then be able to configure what you require

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Comes here often

Re: MX NO-NAT and inbound outbound security rules.

Hi UCcert,

 

Thought so, tnx for the feedback. 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.