MX HA SWAP

Riser
Getting noticed

MX HA SWAP

I have a pair of MX100 appliances configured as Primary and warm-spare in my network. I need to swap them both out for a pair of MX95s as primary and warm-spare. Is there a way to clone all the existing settings in our current MX100 and quickly load them to the MX95 after the swap?

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

Basically, you are following the below method but removing both the MX100 simultaneously and then adding both MX95s.

https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ... 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels