MX HA SWAP

[Riser]

I have a pair of MX100 appliances configured as Primary and warm-spare in my network. I need to swap them both out for a pair of MX95s as primary and warm-spare. Is there a way to clone all the existing settings in our current MX100 and quickly load them to the MX95 after the swap?

[PhilipDAth]

Basically, you are following the below method but removing both the MX100 simultaneously and then adding both MX95s.

https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ...