MX AutoVPN tnnels

SOLVED
Aamir
Here to help

MX AutoVPN tnnels

Hi,

 

I have few clarifications:

 

1) If we consider two sites each having 2 internet links, will MX create 4 AutoVPN tunnels or two?

2) If we want to disable AutoVPN on one Internet link, is that possible in MX?

 

Thanks,

Aamir

1 ACCEPTED SOLUTION
CN
Meraki Alumni (Retired)
Meraki Alumni (Retired)

It's on the SD-WAN & traffic shaping page, under Uplink selection. If you're using a Z-series device then it won't show up. If you're using an MX then it should be right there under load balancing. 

View solution in original post

4 REPLIES 4
CN
Meraki Alumni (Retired)
Meraki Alumni (Retired)

1) Yes, with 2 uplinks on each MX you'll have 4 tunnels.

2) On the traffic shaping page, you can disable active-active VPN. You'll need to set the uplink that you want the tunnel to be primary uplink.

 

 

active-active.png

Aamir
Here to help

Hi,

 

I am not able to see the active-active AutoVpn option is that something new?

 

Thanks,

Aamir

CN
Meraki Alumni (Retired)
Meraki Alumni (Retired)

It's on the SD-WAN & traffic shaping page, under Uplink selection. If you're using a Z-series device then it won't show up. If you're using an MX then it should be right there under load balancing. 

View solution in original post

Aamir
Here to help

ok got it thanks

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels