cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Load balancing question

SOLVED
Highlighted
Building a reputation

Load balancing question

How do I utilize load balancing on dual WAN while making sure one trype of traffic always uses a specified WAN?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Here to help

Re: Load balancing question

Depending on what you consider  "a type of traffic" you can use Flow preferences and SD-WAN Policies. 

Should be enough to 

RomanMD_1-1604305212429.png

 

 

View solution in original post

2 REPLIES 2
Highlighted
Here to help

Re: Load balancing question

Depending on what you consider  "a type of traffic" you can use Flow preferences and SD-WAN Policies. 

Should be enough to 

RomanMD_1-1604305212429.png

 

 

View solution in original post

Highlighted
Meraki Employee

Re: Load balancing question

Hi @trunolimit 
as @RomanMD said the available option for traffic flows can be configured in Security & SD-WAN > (configure) SD-WAN & traffic shaping

Uplink selection > flow preference - L3/L4 filters

or

SD-WAN Policies > VPN traffic - for SD-WAN traffic, L3/L4 - L7 filters

Both configuration are a 'preference', if the specified uplink is down the MX will use the other uplink (if available)

Cheers
Sandro

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.