Interesting Hop

[BreckpointIT]

Hey all,

Hope you all are doing well. 

I've got an MX95 set up with Client VPN. The MX is 192.168.5.x subnet and Client VPN is 192.168.10.x

I have a Z3 in an alternate location that has the 192.168.20.x subnet. i have a Phone connected to that device for testing. i can test with a computer, but I'm not at that site.

I connect to the Client VPN  and tracert a device on the Z3's subnet and i get an extra hop with an IP not in my scope attached. And for the life of me, I don't know what this is.

I also tried a tracert from the 192.168.5.x subnet to 192.168.20.x subnet and it only takes the one hop.

Screenshots of both below.

With Client VPN:

From 192.168.5.x subnet:

Im trying to identify the 192.168.100.1 hop

Does anyone know if Client VPN or Meraki Auto VPN assigns an arbitrary IP to the route? 

[RaphaelL]

When displaying the Route table on the MX there are no entries for 192.168.100.0/X ?

[darrenbrowning]

Hi - Did you ever find out what this was, im getting the same hop in my trace route and just wondered what this is?