Default Route MX

[Sarv]

Here is the scenario:

Site1 has Internet access

Site2 has no Internet access (only cellular available)

Site1 and Site2 connected via Private Metro-E circuit

We want all Traffic from site2 to site1 (including internet traffic) over the Metro-E (which will be connected to LAN port of MX68CW at Site2), if Metro-E at Site2 goes down we want to have VPN (auto-vpn) failover over cellular.

 This would mean default route 0.0.0.0/0 will need to go over the LAN port (Metro-E circuit) and then failover to cellular (which should have auto-vpn setup from site2-to-site1 for failover).

Is this possible?

Site1 will have an MX85.

Thanks

Sarvjit

[alemabrahao]

You have to link Metro-E on wan port instead Lan port.

[Sarv]

Makes sense. Thanks

[alemabrahao]

Take a look at this:

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

[PhilipDAth]

This guide covers what you need.

https://documentation.meraki.com/MX/Deployment_Guides/MPLS_Failover_to_Meraki_Auto_VPN