Client VPN Radius Servers - Priority with more than one server question

Solved
bkraut
Here to help

Client VPN Radius Servers - Priority with more than one server question

Hello,

 

My question is (as asked by a customer) if we have two radius servers defined for example, as follows:

 

RADIUS servers

Host Port SecretActions
10.0.1.11812
xxxxxxxxxxxxxx
 

 

10.0.100.11812
xxxxxxxxxxxxxx
 

 

  
 
 

 

Is there an order priority, e.g. would it always use 10.1.1.1 first until it was not available or took too long? Is there a potential to set an order (like in the FW rules section?

 

Thanks in advance for any input anyone can provide.

1 Accepted Solution
CptnCrnch
Kind of a big deal
Kind of a big deal

From my experience, the first one will be used until it stops responding. Only then will the second one be used.

View solution in original post

2 Replies 2
CptnCrnch
Kind of a big deal
Kind of a big deal

From my experience, the first one will be used until it stops responding. Only then will the second one be used.

bkraut
Here to help

Hi. Thanks for that. Seems problematic then as it indicate that regardless of whether the first address is best or not it will always be used. An issue of the second address is local to the device and the first address is a remote address from another host in the Meraki cloud?

Get notified when there are additional replies to this discussion.