Can MX support ipsec site-to-stie VPN with Cisco ASA or fortigate firewall?

SOLVED
Qing
Getting noticed

Can MX support ipsec site-to-stie VPN with Cisco ASA or fortigate firewall?

Hi , from documents, it seems MX only support site-to-site VPN with MX only, can it support site-to-site VPN with cisco ASA or fortigate firewall? Please advise, thanks in advance.

 

P.S. how to set MS a static IP before deployment? there is no management port.

1 ACCEPTED SOLUTION
BrechtSchamp
Kind of a big deal

The auto VPN only works between MX and Z series.

 

You can build site to site ipsec tunnels to other devices like asa and Fortinet:

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...

 

You can configure basic settings like static ip, gateway, dns, proxy via the local status page :

https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...

View solution in original post

2 REPLIES 2
BrechtSchamp
Kind of a big deal

The auto VPN only works between MX and Z series.

 

You can build site to site ipsec tunnels to other devices like asa and Fortinet:

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...

 

You can configure basic settings like static ip, gateway, dns, proxy via the local status page :

https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...

Thanks a lot, I also found the config document.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels