Block Clients from Connecting to Cisco Anyconnect VPN

[Kyojuro]

Hello, 

I'm just wondering if there is a way to block or allow only specific clients on to the Meraki Cisco Anyconnect VPN?

Thank you. 

[KarstenI]

It all depends on how you define "specific". Whatever it is, it will not be controlled on the MX. If it is pure IP-basd, a device in Front of the MX could handle this with ACLs, for everything else you likely need an integration with your radius server.

[PhilipDAth]

If you use either RADIUS or SAML authentication, you could just create a group to say who is allowed to connect.

If you are using local Meraki auth users - I believe you have to authorise them to use the VPN.